Description
Ogena’s Pure Oxygen® Anti-Foam Solution will help prevent foam from building up inside of the waste tank of Anivac’s systems and being sucked through the vacuum motor. Allowing foam to go through your motor WILL cut the life of the motor substantially.
Use of Ogena’s Pure Oxygen® Anti-Foam Solution will also ensure you can take advantage of the full capacity of the waste tank, leading to less frequent emptying of the machine. Used as per directions Ogena’s Pure Oxygen® Anti-Foam Solution is an inexpensive and easy way to help ensure the long life performance and your enjoyment of your machine.
Directions:
Ogena’s Pure Oxygen® Anti-Foam Solution is a stable and effective foam control agent for use in all Anivac systems.
- Use approximately 1 ounce for every 10 gal of waste tank capacity. For the Anivac 3.5 Multi-Use system use one half ounce of solution, and for the ProHeat II system use one ounce. Vary the amount by the results, if excessive foam still exists use slightly more until you find what works with your water conditions.
- Hard water conditions may require slightly more solution while soft water conditions slightly less.
- Do not allow to freeze.
- Do not put into the fresh water tank or allow to get on the animal.
Caution:
- Contains Food Grade Silicone.
- Eye contact may cause eye irritation. Flush with plenty of clean water and contact a physician if symptoms persist.
- Breathing vapours may cause respiratory tract irritation. Move to fresh air and start CPR if breathing is stopped. Contact a physician immediately.
- Prolonged skin contact may cause skin irritation. Wash with soap and water and contact a physician if symptoms persist.
- Ingestion – this product is practically non-toxic. If ingested seek medical attention.
